AUTOFOAM CS Electronic Controlled Proportioning FSB015-***

$7,107.34$8,184.78

The AutoFoam SC is a high volume automatic foam proportioner. It will correctly mix Class B foam concentrate with water at discharge flow rates up to 3000 GPM.

Clear selection

Description

fsb100_product_image

AUTOFOAM SC Electronic Controlled Proportioning

The AutoFoam SC is a high volume automatic foam proportioner. It will correctly mix Class B foam concentrate with water at discharge flow rates up to 3000 GPM.

This around-the-pump foam proportioning system will automatically maintain a selected foam percent mixture regardless of discharge water flow fluctuations. Around-the-pump proportioning systems operate with an eductor installed between the water pump intake and pump discharge. A small flow of water from the pump discharge passes through the eductor and creates a vacuum that draws foam concentrate into the eductor and ejects it into the intake side of the pump.

The AutoFoam SC is microprocessor controlled and easy to use. Power the system with the push of a button, two buttons are used to select the foam proportioning percent, three multifunction displays provide flow rate and operational information.  The upper flow display shows the foam concentrate flow rate. The lower display shows the discharge water flow rate. The message display shows the mode of operation and the selected percent of foam concentrate.

The operator can override automatic control by using the manual override buttons. In manual mode the operator is in control of opening or closing the foam proportioning valve to control how much foam concentrate flows into solution.

 

Options

FSBoption-AL1      Flow sensor mount, alum boss, option

FSBoption-AL2      Flow sensor mount, alum boss flow cond.

FSBoption-BSP1    Flow sensor mount, foam valve, BSP

FSBoption-DT1      Flow sensor mount, no-weld DT short 6-8in (requires F1)

FSBoption-F2         Flow sensor w/ITT conn. Option

FSBoption-HL1      Flow sensor mount, Hale flange

FSBoption-NW1    Flow sensor mount, no-weld

FSBoption-NW2    Flow sensor mount, no-weld kit, flow cond.

FSBoption-PT1      Flow sensor mount, pipe tee

FSBoption-PT2      Flow sensor mount, pipe tee, flow cond.

FSBoption-RC1     Flow sensor mount, retaining cap only

FSBoption-RS1      Foam system, AUTOFOAM SC, Remote enable

FSBoption-SC1      Flow sensor mount, saddle clamp, standard

FSBoption-SC2      Flow sensor mount, saddle clamp, flow cond.

FSBoption-SS1      Flow sensor mount, SS boss

FSBoption-SS2      Flow sensor mount, SS boss, flow cond.

FSBoption-ST1      Flow sensor mount, steel boss

FSBoption-ST2      Flow sensor mount, steel boss, flow cond.

FSBoption-WA1    Flow sensor mount, Waterous flange

FSBoption-WA2    Flow sensor mount, Waterous flange, flow cond.

Additional information

Weight 75 lbs

Reviews

There are no reviews yet.

Be the first to review “AUTOFOAM CS Electronic Controlled Proportioning FSB015-***”

Your email address will not be published. Required fields are marked *