The Fire Research Seat Monitor and Data Acquisition System meets and exceeds the requirements laid out in NFPA 1901 (2009) paragraph 4.11 requirements for a Vehicle Data Recorder and paragraph 14.1.3.10 requirements for a Seat Belt Warning system. The display module has seat belt icons to display the current state of up to 13 programmed seats in the vehicle, a silence button for the audible alarm, power and data LEDs.

The separate Vehicle Data Recorder (VDR) houses the on-board computer and software, the hardware for all system interconnections, and the wireless interface. It is capable of processing input data from the vehicle J1939 CAN Bus, the data link, or separate hard-wired inputs. The VDR communicates via the proprietary FRC data link with the system modules.

STANDARD FEATURES

• Meets NFPA 1901 4.11 requirements
  • 48 Hours of Stored Second-by-Second Data
  • 100 Hours of Stored Minute-by-Minute Data
  • All Data is Date and Time Stamped
• All Stored and Collected Data is Password Protected
• Wireless Interface for Uploading Data from VDR
• HAWK Data Management Software Package
• J1939 CAN Bus Interface
• Discrete Inputs (When Data is not Available on J1939 CAN Bus)
• LED to indicate when the VDR is receiving data from the ECM over the vehicle CAN bus.
• Data Collector Remotely Uploads and Stores Data from up to 12 VDRs
• Exceeds NFPA 1901 14.1.3.10 requirements
  • Monitors up to 13 Seating Positions
  • Provides a Visual Display Showing the Condition at Each Position
  • Validates Sit and Buckle Sequence
  • Audio and Visual Alarm Outputs
• Programmable Seat Configuration

HAWK Software

HAWK Software stores data retrieved from the VDR in a relational database, provides the means to manage users and vehicles with VDRs, provides graphical displays of the stored data, and allows users to produce formatted reports of that data. HAWK software can manage data from many different vehicles in a fleet.

Jump to these navigation sections:

• Related Downloads