THROTTLE XCEL Engine Throttle and Engine Displays

The panel has a 4-digit LED display for engine RPM, three LED bar graphs that provide a constant display of the engine oil pressure, engine coolant temperature, and battery voltage. It has a message display that shows the time and date during normal operations and fault warning alarms as they occur. When selected by the operator it will show monitored information, stored data, and program options.

The ThrottleXcel panel has a built-in FRC InfinityPRO remote engine throttle. This hand throttle uses optical technology with an Infrared Encoder (IRE) to detect the direction and speed of the control knob as it is rotated. There is no potentiometer, electromechanical switch, or mechanical stop. The electrical signal from the encoder is interpreted by a microprocessor and the engine RPM control signal is adjusted. This will cause the engine RPM to increase or decrease proportionally to how fast the control knob is rotated. The engine RPM control signal will be set at idle when power is applied to the ThrottleXcel regardless of the control knob position.

The panel receives engine input information via the J1939 databus and/or installed sensors.

STANDARD FEATURES

• Always Starts From IDLE RPM
• Large RPM Display
• Three Bi-Color LED Bar Graphs
• Message Display
• Remote Hand Throttle with No Mechanical Stops
• Interlock Signal Recognition
• Programmable for Engine Type at Installation
• Records Date and Time of Warning Alarm Occurrences
• Red IDLE Button

Jump to these navigation sections:

• Related Downloads