DRYGEAR PRO

The DryGear Professional is a powerful, efficient, and easy to use drying system. This system is completely safe for ALL turnout gear!

The polyester vinyl tent enclosure ensures that the inside and outside surfaces of all equipment receives the maximum amount of exposure to moving air.

Each station is able to accommodate a complete set of turnout gear including coat, pants, boots, helmet and gloves.

This multi-station system is available in 3, 4, 6, 7, and 8 station configurations. The DryGear Professional system can accommodate a complete set of turnout gear at each station.

Exceeds NFPA 1851 recommendations.

STANDARD FEATURES

• Hanger Tube Assemblies Include Suspender Hooks
• Completely Dry the Inside and Outside of Gear in 4 to 5 Hours
• Transparent Easy Access Roll-Up Front Cover
• Manifold and Frame Surfaces have an Industrial Powder Coat Finish
• Available with an Optional Caster Kit (Wheels)
• Tested and Proven in the Field Since 1992

Exceeds NFPA 1851 Standard on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensembles

• The DryGear system utilizes forced air ventilation.
• There is no mechanical action to damage gear.
• The manifold and hanger tube assemblies provide maximum air exposure.
• The system operates with or without heated air.
• Heated air does not reach gear-degrading temperatures.
• There is built-in heater cutoff protection.
• The DryGear system is safe for ALL turnout gear.

Control Panel Features

• Simple Operating Instructions
• Six Hour Timer Switch
• Air Only/Air & Heat Select Switch
• Heater Selected Indicator Light

SPECIFICATIONS

• Sizes
  The DRY GEAR Professional is available in 3, 4, 6, 7, and 8 station configurations.
• Air Flow
  40-50 Cubic feet per minute (CFM) per station
• Electrical requirements
  220 VAC, 30 Amps
• Motor (3,4, and 6 stations)
  Power : 3 HP
  Voltage : 208/230 Volts
  Current : 15.5/15.3 Amps
  Type : NEMA 56
• Motor (7 and 8 stations)
  Power: 5 HP
  Voltage : 220 Volts
  Current : 19.6 Amps
  Type : NEMA 56
• Heater
  Power : 2400 Watts
  Current : 10 Amps
  Thermistor : Overheat Cutoff
  Timer : 6 Hours
• Materials
  Tubing : Aluminum square and round tubing
  Enclosure : Rip-stop polyester vinyl

Jump to these navigation sections:

• Related Downloads