Home > TSS Scene Lights > Fire Research Corp > Accessories
TANKLIFTER Compressed Gas Cylinder Handler TSS100-TLEasily transfer breathing air cylinders on and off apparatus! The TankLifter is designed to assist in the lifting and moving of compressed gas cylinders into and out of the storage compartment. It helps you to move and lift cylinders into a vehicle or storage rack. The large 10-inch pneumatic rear wheels and stabilizing legs with front wheels provide a firm base when lifting a cylinder. A sure locking hold-down strap keeps the cylinder in place and the hand-cranked winch provides precise lifting with a high strength nylon strap. STANDARD FEATURES
SPECIFICATIONSThe Tank Lifter is designed to lift gas cylinders:
|
||
Watch Dog WDA108
The Compartment Door and Equipment Monitor is available in two models, each is available with eight or eighteen single-wire input connections. The WatchDog stand alone model has a single wire output that is connected to a hazard light. The WATCHDOG stand alone module connects directly to a cab mounted Hazard Light. It is available with eight or eighteen single-wire input connections and a single wire output that is connected to a hazard light. Helps meet NFPA 1901* requirements for monitoring hazardous conditions. Additional Info
|
||
WATCHDOG PRO - VDR Wired Module WDA208
The Compartment Door and Equipment Monitor is available in two models, each is available with eight or eighteen single-wire input connections. The WatchDog stand alone model has a single wire output that is connected to a hazard light. The WATCHDOG PRO installs as an integral part of the FRC Seat Monitor and Data Acquisition System. It is available with eight or eighteen single-wire input connections. The WatchDog PRO has a two wire datalink output that connects to the FRC VDR and provides real time data to the Seat Monitor display.
|
||
SAFER SEARCH SYSTEM SDA***The Safer Search Device System is simple to deploy, improves search accountability for team members, and makes large difficult area searches more manageable and safer for all firefighters. Lost and don’t know which way to go? Have you ever had to remove your gloves to tie an over hand knot? Have you ever asked yourself "how far have I gone?" or "how far is it to get out?" These are things of the past with the new FRC SSD. STANDARD FEATURES
|
||
JackStrap, apparatus hose restraint JSA100The JackStrap is designed to help prevent fire hose from inadvertently coming off the apparatus while responding to or returning from an incident.The JackStrap is used to help carry or pull the hose, it helps secure the hose to a hydrant when laying hose. Additional Info
|
||
Ladder cover, Skullsaver, SSA100-***This is the original KEEP BACK ladder cover also available with a reflective American Flag design. Protect firefighters from the hazard of protruding ladder ends at the rear of apparatus. Additional Info
|
||
DryGear PRO, Gear dryer DGA230-***The most powerful, efficient, easy to use dryer FRC has ever offered, and its completely safe for all gear. The DryGear Professional exceeds NFPA 1851 Standards on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensembles. Thoroughly drying thick, heavy gear by hanging it outside to air dry can take days, but if you need to get your gear back in service quicker and without damaging it, here's the solution Additional Info
|
||
DryGear, Gear dryer, PLUS, DGA330-***The DryGear Plus is a standard DryGear Pro and will perform all the same functions. The Plus incorporates removable hanger assemblies. This creates a space inside that will allow racks of hose or other loose equipment to be rolled in for fast, safe drying. Additional Info
|
||
Man Saver Bar MSA110The ManSaver is a padded safety bar that helps safeguard the elevated walk-through area on top mount pumps. The ManSaver bar operates in two directions to allow access to the area, inward or up. It is spring loaded so that it always returns to a horizontal closed position with no hooks or clips to latch or harnesses to buckle.Price is for 14 inch long bar please call for pricing. Additional Info
|
||
MANSAVER Platform Bars MSA120The Platform Bar is a safety bar that can be mounted across walk-through openings on pumpers or on the turntable of aerial devices to help prevent an accidental fall. The Platform Bar is spring loaded so that it always returns to a horizontal position. There are no hooks to latch or harnesses to buckle. This clever design helps insure that the turntable will always be protected as firefighters do not have to waste time closing or latching anything behind them. To enter, push the Platform Bar in or up. To exit, simply lift it. STANDARD FEATURES
MATERIALS
|
||
MANSAVER Bench Seat Bars MSA300The Bench Seat Bar is a safety bar that can be mounted at the end of a bench seat to use as an arm rest. Made to operate only in an up and down fashion, the bar will not swing side to side. STANDARD FEATURES
|
||
MANSAVER Aerial Bars MSA406The Aerial Bar is a safety bar that can be mounted at the end of the ladder across the opening to the bucket. Like the standard ManSaver, it is spring loaded so an operator does not have to remember to close or latch it. The aerial bar is a variation on our standard ManSaver. This uncovered bar has a stainless steel U-shaped tube welded to it to cover more area and to help prevent a person from slipping underneath the bar. Designed for use at the top of an aerial device, at the back of the "bucket" where the ladder leads down to the elevated turntable. The ladder is often at precarious angles, and an accidental fall from the bucket during operations could cause serious injury. STANDARD FEATURES
MOUNTINGThe standard bar mounts on the left as you enter the basket from the ladder. If this kind of mounting will interfere with a control panel in the basket, an aerial bar that mounts on the opposite side is available. The Aerial ar comes with a 6 or 10 inch stainless steel loop welded to an unpadded ManSaver. Additional Info
|
||
MANSAVER Safety Bars and Gates for Toll Plazas MSA600The FRC ManSaver Bar has been used in the fire and emergency service industry for years to help safeguard personnel during operations. This spring loaded safety bar is now available as a Safety Gate to help safeguard toll plaza personnel. The SAFETY GATE and STANCHION for TOLL PLAZAS helps safeguard personnel from inadvertently entering active traffic lanes. Toll plaza staff safety is a critical issue. Established safety rules and procedures are in place to ensure the safety of employees. The Safety Gate is currently in use at toll plazas as an integral part of a complete safety program. Average vehicle operating speeds through toll plazas are on the rise due to the increase of dedicated Electronic Toll Collection (ETC) lanes. Toll collectors, lane walkers, maintenance workers, and vendors servicing equipment who must cross toll collection lanes need safety measures in place to protect them. The Safety Gate is an innovative safety device which will help minimize pedestrian vulnerability to vehicle strikes. A latched gate or chain can act as a physical barrier at pedestrian access points to traffic lanes, but these safety devices require user action to reset them and can easily be left open negating any benefit they might provide. The Safety Gate is spring loaded so that it always returns to a horizontal closed position. There is no user action required. The Safety Gate and Stanchion is designed to help safeguard toll plaza personnel in areas where crosswalks and traffic lanes intersect. FEATURES
CURRENT INSTALLATIONSFlorida Turnpike(FDOT-Turnpike District) Pennsylvania Turnpike (Pennsylvania Turnpike Commission) Delaware Memorial Bridge (Delaware River and Bay Authority) Massachusetts Port Authority Miami Dade Expressway New York State Bridge Authority Additional Info
|
||
MANSAVER - Replacement Covers MSA105-***Replacement padding and cover for all Mansaver bars. When measuring, measure the entire length of the mansaver bar. If the bar is 22" you will need an 18 " replacement cover. If you order an 18" Cover you will get a 14" long cover. Padding is closed cell polyurethane foam. Covering is 13 oz. rip stop vinyl, secured to the bar with an epoxy that contains epoxy resins and amine hardners. Additional Info
|
||
Interior Intercom, 2-station ICA100-A00Interior intercom systems for ambulances and rescue vehicles. Intercom, 2-station, 8W, surf-A, surf-R, plastic case Additional Info
|
||
ACT Intercom System 2 station HF or PTT ICA900
The ICA100 Interior Intercom The FRC ICA100 Intercom is designed to meet the demanding needs of ambulances and rescue personnel for a two way vehicle communication system. Basic SystemThe basic two-way intercom system includes a master station with volume and Push-To-Talk (PTT) controls and a remote station that provides hands-free operation. The remote station is always in transmit mode unless interrupted by a transmission from the master station. SYSTEM OPTIONSRemote Station with PTT ButtonThis option is for installations where a remote station with hands free operation is not required. The PTT button must be pressed for the remote station to transmit. Additional Info
|
||
Exterior Intercom System ICA200Apparatus intercom systems that meet the demands of rescue and fire service personnel for two or three-way communication.Cantact TSS for different options and mounting requirments. Additional Info
|
888-531-5595
828-275-6954
Fax 828 628-1554
The International Disaster Conference & Expo: January 17 - 19, 2012 - The New Orleans Ernest N. Morial Convention Center Booth 417
"November Special"
50% off shipping up tp $100
Traffic Safety System is proud to be a dealer for Fire Research Corp. If you don't find the products you are looking for please contact us. We will meet or beat the price on any comparable item.