FireFly Compartment mounted LED Light LED100-Q01

FIREFLY brings ultra bright white LED light to all compartments that exceeds other fixtures. The LEDs are housed in a waterproof anodized case, built tough for all environments. FIREFLY is easy to install because it can be mounted in any orientation and on any flat surface. Additional Info

SUNSTRIP LED Strip Lighting LED200-***

SUNSTRIP is the brightest LED strip light available. This high quality ultra bright white LED light is ideal for compartments, panels, under body applications, walkways, and stairwells. SUNSTRIP is designed tough to withstand any vehicle vibration. SUNSTRIP is available in 9 inch length increments from 9 to 63 inches. Additional Info

Evolution LED Lamp Head FCA100-V15

EVOLUTION LED Lampheads

EVOLUTION low profile LED lampheads generate more than 15,000 lumens of ultra bright white light. The LED light output is instant-on at full intensity and provides immediate restarts with no warm-up time required.

The EVOLUTION long life LEDs are highly rugged and allow for low maintenance and expense over the operational life. The lampheads unique parabolic reflector projects the light directly onto the action area and also illuminates the immediate working area around the vehicle.

EVOLUTION lampheads are available in all FRC mounting configurations; telescopic poles, tripods, non-telescopic mounts, recessed mounts and brow mounts.

• 12/24 volt DC , 13/6.5 amps
• Long operating LEDs – rated at 50,000 hours
• Five year LED lighting warranty

SPECTRA LED Lampheads SPA100-***

SPECTRA LED lampheads output an impressive 20,000 lumens of super bright white light making it the brightest LED scene light available.

The advanced lens design generates a uniform flood and spot combination light pattern. This light pattern provides enhanced work area visibility as well as illuminates objects at a farther distance.

The SPECTRA lamphead is available in a surface mount configuration. The slim body design keeps the lamphead closer to the vehicle.

SPECTRA can be used with all FRC telescopic poles, tripods, non-telescopic mounts, and brow mounts. Additional Info

SPECTRA LED Surface Mounts SPA260-***

Designed specifically for Ambulance and Emergency Response Vehicles, the Fire Research SPA260-Q15 surface mount light is easy to install with NO PANEL CUTOUT required! The innovative lens focuses 100% of the ultra bright white LED light directly where it is needed most - directly onto the scene. RATED AT AN INCREDIBLE 15000 LUMENS. The lens redirects the light along the vehicle and out onto the working area. Additional Info

LED Flood and Loading light SPA900-Q65

LED surface mounted area light. Designed specifically for Ambulance and Emergency Response Vehicles. The Brightest Scene light for Emergency responce and Ambulance. Additional Info

Focus Light Head FCA100,12 & 24 volt DC

 The FCA low profile lampheads allow for mounting versitillity that other lampheads do not. The Focus  12 volt DC lamphead can be ordered without an FRC mount. It has an adjustable mounting arm that allows the lamphead to pivot up and down. The arm has 3/4" NPT threads for installing the lamphead onto a lighting fixture. The three wires for power extend out the bottom of the mounting arm. Additional Info

Focus Light Head FCA100, 120 volt AC

The 120 volt FCA low profile lampheads allow for mounting versitillity that other lampheads do not. The Focus lamphead can be ordered without an FRC mount. It has an adjustable mounting arm that allows the lamphead to pivot up and down. The arm has 3/4" NPT threads for installing the lamphead onto a lighting fixture. The three wires for power extend out the bottom of the mounting arm. Additional Info

Focus Recessed Mount FCA200 /210

The Focus Recessed light can be mounted into the exterior vehicle wall for applications where side mounted poles or fixed mounts are not practical. It requires only a 2" recess. The bezel and glass are removable from the front of the fixture (by removing 4 cap head screws) for easy access to the bulb as needed. Additional Info

Focus Under Aerial Mounts FCA300

The Focus Under Aerial light is for mounting under an aerial bucket or platform. Adjustable brackets allow the light to be aimed 90 degrees fromforward to directly downward. When aimed forward this light needs only 4" clearance (7.5" when aimed straight down). Additional Info

Focus Roof Mount FCA300U

The Focus Roof Mount forward facing light is for mounting on top of the cab or box. Adjustable brackets allow the light to be aimed 90 degrees from forward to directly downward. When aimed forward this light needs only 4" clearance (7.5" when aimed straight down). Additional Info

Focus Standard FlangeTop Mount, Pull Up FCA510

Model 510 Telescopic Pole Top Mount, Pull Up A 3.25" round mounting flange is standard on the 510 pole.A 2.5" square flange is available on the 510C pole.The standard outer tube is length 11.5" and allows the lamphead to raise 43".Options on this model pole include: -CL (Custom Length Pole)-SW510 (Raised Pole Switch and Indicator)-TW (Wire Out of the Top of the Pole)Model 510E pole is available with a square flange and is designed to be mounted into a 3" extrusion. Additional Info

Focus Thru-the-Roof, Push Up FCA512

Model 512 Telescopic Pole Thru-the-Roof, Push Up A round, "no drip" mounting flange is provided.The standard outer tube is length 12" and allows the lamphead to raise 39".At the bottom of the extension pole is a knurled aluminum push up handle.Options on this model pole include: -CL (Custom Length Pole)-SW512 (Raised Pole Switch and Indicator)-SR (Steady Rest Bottom Bracket)-TW (Wire Out of the Top of the Pole)This pole is designed with a weather proof 'No-Drip' mounting flange so it can be mounted on the roof and operated from inside of the vehicle. Additional Info

Focus, Side Mount Push-up Pole FCA 530

Model 530 Telescopic Pole

Side Mount, Push Up

• Two standard side mount brackets are provided:

• 2.75" offset with Optimum or NightMaster lampheads;

  3.5" offset with Focus lampheads;

  5" offset with Optimum HID lampheads.

• The outer tube is grooved aluminum extrusion and qualifies as an NFPA compliant handrail.

• The standard outer tube is length 20" and allows the lamphead to raise 30", choosing an optional 10" outer tube allows for a 40" extension.

• At the bottom of the extension pole is a knurled aluminum push up handle.

Options on this model pole include:

• All Side Mount Brackets

• -CL (Custom Length Pole)

• -SW530 (Raised Pole Switch and Indicator)

• -SR (Steady Rest Bottom Bracket)

• -TW (Wire Out of the Top of the Pole)

Focus, Side Mount, Pull Up FCA540

Model 540 Telescopic Pole Side Mount, Pull Up Two standard side mount brackets are provided:2.75" offset with Optimum or NightMaster lampheads; 3.5" offset with Focus lampheads; 5" offset with Optimum HID lampheads.The outer tube is grooved aluminum extrusion and qualifies as an NFPA compliant handrail.The standard outer tube is length 53.5" and allows the lamphead to raise 39".An internal brake slows the extension pole during lowering.Options on this model pole include: All Side Mount Brackets-CL (Custom Length Pole)-SW540 (Raised Pole Switch and Indicator)-TW (Wire Out of the Top of the Pole)(-TW, Top Wire is Standard on Focus D30, NightMaster DT, and NightMaster TC Lampheads.) Additional Info

Focus Side Mount, Pull Up, Short outer Pole FCA542

Model 542 Telescopic Pole Side Mount, Pull Up Two standard side mount brackets are provided:2.75" offset with Optimum or NightMaster lampheads; 3.5" offset with Focus lampheads; 5" offset with Optimum HID lampheads.The outer tube is grooved aluminum extrusion and qualifies as an NFPA compliant handrail.The standard outer tube is 20" and allows the lamphead to raise 33", choosing an optional 10" outer tube allows for a 43" extension.Options on this model pole include: All Side Mount Brackets-CL (Custom Length Pole)-SW540 (Raised Pole Switch and Indicator)-TW (Wire Out of the Top of the Pole) Additional Info

FOCUS Fixed Top Mounts FCA570

The Fixed Top Mount allows for a full 450° of rotation. This means that light coverage can be a full circle, plus another quarter turn which ensures no blind spot. The 570 base has a built-in stop to prevent the internal wiring from binding. A built-in friction mechanism ensures the light will not rotate when the vehicle is in motion. Additional Info

FOCUS Fixed Side Mounts FCA580

The Fixed Top Mount allows for a full 450° of rotation. This means that light coverage can be a full circle, plus another quarter turn which ensures no blind spot. The 570 base has a built-in stop to prevent the internal wiring from binding. A built-in friction mechanism ensures the light will not rotate when the vehicle is in motion. The pedestal has a round mounting base attached to a side mount bracket. Additional Info

Focus Tripod Scene Light FCA600

TELESCOPIC TRIPOD FLOODLIGHT Tripods - Available in Optimum and Focus lamp heads. The finest lighting stand in the industry. The FRC tripod is designed and constructed to be rugged and durable. It is easy to set up, sturdy, and truck mountable. It is compatible with most FRC lampheads and applicable scene lighting options.All FRC Telescopic Poles: Are made of anodized aluminum. Have extension poles that rotate a full 360°. Have a four foot retractile cord extending from the bottom. Have the exclusive safety twist lock to secure the extension pole in position. Standard wattage is a 750 watt 120 volt.

Options Include:

Honda Generator

Light head type

Bulb Wattage 

12 Trailer power connector Additional Info

FRC Tripod Mounting brackets

The 603 bracket sets consist of a small triangular bracket for the tripod feet and a QUICK RELEASE spring loaded dead-bolt lock to hold the tripod at its midpoint. The brackets can be used on the exterior of a vehicle or in a compartment. single and double tripod mount available. Additional Info

Focus Portable Scene Light Model FCA700

The 700 provides a portable and sturdy ground base to light up a remote scene. Complete with a wire guard over the lamphead and a short cable with a NEMA L5-15 plug. Aim the lamphead and tighten into place with the knurled locking knob. The Standard light is a Focus flood light with a 750 watt 120 volt. Other wattage sizes available. Additional Info

Focus Brow Contour Mount FCA800-

The Brow Contour Mounts have been designed to allow Focus scene lighting fixtures to mount on the roof edge (front or side) of many modern truck cabs. Focus fixtures offer a low profile to reduce the chance of interference with light from emergency light bars Additional Info

Focus Brow Universal Mount FCA830-***

The universal mounts have been designed to allow Focus scene lighting fixtures to mount on any cab roof. The universal bracket pivots to allow for horizontal adjustment of the light beam.
Focus lampheads offer a very low profile. Additional Info

Focus Brow Flat Mount FCA850-***

The Brow Flat Mounts have been designed to allow Focus scene lighting fixtures to mount on any flat surface (such as the cab roof). Focus fixtures offer a low profile to reduce the chance of interference with light from emergency light bars. Additional Info

Optimun Light Head OPA100, 120 & 240 volt

The OPA lampheads are designed to be super-efficient and provide a maximum transfer of light from the bulb to the scene.Fire Research Corporation manufactures high intensity scene lighting with five styles of lampheads. Each lamphead is available with multiple mounting styles and a verity of options for vehicle or portable use. The Optimum lamphead can be ordered without an FRC mount. It has an adjustable mounting arm that allows the lamphead to pivot up and down. The arm has 3/4" NPT threads for installing the lamphead onto a lighting fixture. The three wires for power extend out the bottom of the mounting arm. Additional Info

Optimum HID Light Head OPA100, 12 & 24 volt DC

The 12 volt DC OPA lampheads are designed to be super-efficient and provide a maximum transfer of light from the bulb to the scene. The Optimum lamphead can be ordered without an FRC mount. It has an adjustable mounting arm that allows the lamphead to pivot up and down. The arm has 3/4" NPT threads for installing the lamphead onto a lighting fixture. The three wires for power extend out the bottom of the mounting arm. Additional Info

Optimum Recessed Mount OPA 200

The Optimum Recessed lights can be mounted into the exterior vehicle wall for applications where side mounted poles or fixed mounts are not practical. Two variations are available the OPA200 requires only a 2" recess, the OPA250 needs a 4" recess. The bezel and glass are removable from the front of the fixture (by removing 4 cap head screws) for easy access to the bulb as needed. Additional Info

Optimum HID Recessed OPA230

The Optimum HID Recessed lights can be mounted into the exterior vehicle wall for applications where side mounted poles or fixed mounts are not practical. The bezel and glass are removable from the front of the fixture (by removing 4 cap head screws) for easy access to the bulb as needed. Additional Info

Optimum Deep recessed Mount OPA250

The Optimum Recessed lights can be mounted into the exterior vehicle wall for applications where side mounted poles or fixed mounts are not practical. Two variations are available the OPA200 requires only a 2" recess, the OPA250 needs a 4" recess. The bezel and glass are removable from the front of the fixture (by removing 4 cap head screws) for easy access to the bulb as neede Additional Info