Watch Dog WDA108

The Compartment Door and Equipment Monitor is available in two models, each is available with eight or eighteen single-wire input connections. The WatchDog stand alone model has a single wire output that is connected to a hazard light.
 The WatchDog PRO model has a two wire datalink output that connects to the FRC VDR and provides real time data to the Seat Monitor display.

The WATCHDOG stand alone module connects directly to a cab mounted Hazard Light. It is available with eight or eighteen single-wire input connections and a single wire output that is connected to a hazard light.

Helps meet NFPA 1901* requirements for monitoring hazardous conditions.  Additional Info

Price:	$260.62

Watch Dog Input Options:
Single Output, 8-Inputs WDA108 Single Output, 18-Inputs WDA118  

Quantity:

WATCHDOG PRO - VDR Wired Module WDA208

The Compartment Door and Equipment Monitor is available in two models, each is available with eight or eighteen single-wire input connections. The WatchDog stand alone model has a single wire output that is connected to a hazard light.
 The WatchDog PRO model has a two wire datalink output that connects to the FRC VDR and provides real time data to the Seat Monitor display.

 The WATCHDOG PRO installs as an integral part of the FRC Seat Monitor and Data Acquisition System. It is available with eight or eighteen single-wire input connections. The WatchDog PRO has a two wire datalink output that connects to the FRC VDR and provides real time data to the Seat Monitor display.

• connects to the VDR
• interfaces with the Seat Monitor Display
• exchanges data with HAWK Software.

Helps meet NFPA 1901* requirements for monitoring hazardous conditions. Additional Info

Price:	$260.62

Watch Dog Input Options:
Single Output, 8-Inputs WDA108 Single Output, 18-Inputs WDA118  

Quantity:

SAFER SEARCH SYSTEM SDA***

The Safer Search Device System is simple to deploy, improves search accountability for team members, and makes large difficult area searches more manageable and safer for all firefighters.

Lost and don’t know which way to go? Have you ever had to remove your gloves to tie an over hand knot? Have you ever asked yourself "how far have I gone?" or "how far is it to get out?" These are things of the past with the new FRC SSD.

STANDARD FEATURES

• Lock/Direction Markers and Distance Markers help firefighters know their position along the search rope
• The markers are designed to allow for quick and easy rope deployment from the bag
• All are anodized machined 6061-T6 aluminum
• Shapes are easy to feel with a gloved hand
• All markers are locked in place with a stainless steel set screw.

Additional Info

Price:	$981.11

Safer Search Length:
SAFER, 200', w/rope, bag, stnd taglines SAFER, 300', w/ rope, bag, stnd taglines SAFER, 400', w/ rope, bag, stnd taglines  
2nd SSD (safer search slider):
No 2nd safer search slider Yes 2nd safer search slider  
Safer Search Retractable Tag line:
No Retractable tag line Add 2 (two)Retractable tag lines Add 4 (four)Retractable tag lines  

Quantity:

JackStrap, apparatus hose restraint JSA100

The JackStrap is designed to help prevent fire hose from inadvertently coming off the apparatus while responding to or returning from an incident.The JackStrap is used to help carry or pull the hose, it helps secure the hose to a hydrant when laying hose. Additional Info

Price:	$48.60

JackStrap, coupling accessory pouch option:
No coupling accessory pouch option Yes coupling accessory pouch option  

Quantity:

Ladder cover, Skullsaver, SSA100-***

This is the original KEEP BACK ladder cover also available with a reflective American Flag design. Protect firefighters from the hazard of protruding ladder ends at the rear of apparatus. Additional Info

Price:	$85.12

Design on cover:
American Flag KEEP BACK Plain  
Size needed:
22Hx5Wx8D 23Hx9Wx8D 25Hx10Wx8D 27Hx12Wx8D Custom size  
Color needed:
Yellow Red  
Positioning of cover:
Vertical Horizontal  

Quantity:

DryGear PRO, Gear dryer DGA230-***

The most powerful, efficient, easy to use dryer FRC has ever offered, and its completely safe for all gear. The DryGear Professional exceeds NFPA 1851 Standards on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensembles. Thoroughly drying thick, heavy gear by hanging it outside to air dry can take days, but if you need to get your gear back in service quicker and without damaging it, here's the solution Additional Info

Price:	$5,384.48

Gear Dryer Options:
3 Gear Dryer Stations 4 Gear Dryer Stations 6 Gear Dryer Stations 7 Gear Dryer Stations 8 Gear Dryer Stations  
Wheels Options:
No Wheels With Wheels  

Quantity:

DryGear, Gear dryer, PLUS, DGA330-***

The DryGear Plus is a standard DryGear Pro and will perform all the same functions. The Plus incorporates removable hanger assemblies. This creates a space inside that will allow racks of hose or other loose equipment to be rolled in for fast, safe drying. Additional Info

Price:	$6,074.11

Gear Dryer Stations:
3 Station Removable Hangers 4 Station Removable Hangers 6 Station Removable Hangers 7 Station Removable Hangers 8 Station Removable Hangers  
Wheels Options:
No Wheels With Wheels  

Quantity:

Man Saver Bar MSA110

The ManSaver is a padded safety bar that helps safeguard the elevated walk-through area on top mount pumps. The ManSaver bar operates in two directions to allow access to the area, inward or up. It is spring loaded so that it always returns to a horizontal closed position with no hooks or clips to latch or harnesses to buckle.Price is for 14 inch long bar please call for pricing.  Additional Info

Price:	$312.86

ManSaver Bar length:
14" length, yellow vinyl cover A14 16" length, yellow vinyl cover A16 18" length, yellow vinyl cover A18 20" length, yellow vinyl cover A20 22" length, yellow vinyl cover A22 24" length, yellow vinyl cover A24 26" length, yellow vinyl cover A26 28" length, yellow vinyl cover A28 30" length, yellow vinyl cover A30 32" length, yellow vinyl cover A32 34" length, yellow vinyl cover A34  
Cover color:
Yellow Grey Red Custom  

Quantity:

MANSAVER Platform Bars MSA120

The Platform Bar is a safety bar that can be mounted across walk-through openings on pumpers or on the turntable of aerial devices to help prevent an accidental fall.

The Platform Bar is spring loaded so that it always returns to a horizontal position. There are no hooks to latch or harnesses to buckle. This clever design helps insure that the turntable will always be protected as firefighters do not have to waste time closing or latching anything behind them. To enter, push the Platform Bar in or up. To exit, simply lift it.

STANDARD FEATURES

• Constructed with aluminum extrusion and aluminum bronze castings, so it does not rust.
• Available from 14" through 36" (even sizes only).
• Used on Fire Apparatus, Recycling Vehicles, in manufacturing and power plants along catwalks, at Toll Booth plazas.

MATERIALS

• Knuckle is aluminum bronze with stainless 70-4PH pins.
• Bar itself is of extruded aluminum.
• Various screws are seated with Locktite 290.
• Spring mechanism consists of stainless chain and various machined aluminum parts.

Additional Info

Price:	$293.63

ManSaver Bar length:
14" length, yellow vinyl cover A14 16" length, yellow vinyl cover A16 18" length, yellow vinyl cover A18 20" length, yellow vinyl cover A20 22" length, yellow vinyl cover A22 24" length, yellow vinyl cover A24 26" length, yellow vinyl cover A26 28" length, yellow vinyl cover A28 30" length, yellow vinyl cover A30 32" length, yellow vinyl cover A32 34" length, yellow vinyl cover A34  
Cover color:
Yellow Grey Red Custom  

Quantity:

MANSAVER Bench Seat Bars MSA300

The Bench Seat Bar is a safety bar that can be mounted at the end of a bench seat to use as an arm rest.

Made to operate only in an up and down fashion, the bar will not swing side to side.

STANDARD FEATURES

• Opens in one direction (up and down) only.
• Covered with a heavy layer of foam and a tough rip-stop vinyl outer covering.
• Available from 18" through 24" (even sizes only).
• Can be pinned in upright position.
• Available in multiple colors.

Additional Info

Price:	$312.86

Bench Seat bar length:
Bench Seat bar, 18", no pin, gray Bench Seat bar, 20", no pin, gray Bench Seat bar, 22", no pin, gray Bench Seat bar, 24", no pin, gray  
Up right lock pin:
no Pin Yes Pin  
Cover color:
Yellow Grey Red Custom  

Quantity:

MANSAVER Aerial Bars MSA406

The Aerial Bar is a safety bar that can be mounted at the end of the ladder across the opening to the bucket. Like the standard ManSaver, it is spring loaded so an operator does not have to remember to close or latch it.

The aerial bar is a variation on our standard ManSaver. This uncovered bar has a stainless steel U-shaped tube welded to it to cover more area and to help prevent a person from slipping underneath the bar. Designed for use at the top of an aerial device, at the back of the "bucket" where the ladder leads down to the elevated turntable. The ladder is often at precarious angles, and an accidental fall from the bucket during operations could cause serious injury.

STANDARD FEATURES

• Opens in two directions (up and in).
• Available in 24" and 26" sizes only.
• Stainless loop welded to the bar provides extra area protection.
• Spring loaded to always return to a closed position.
• 4 grade 8 mounting bolts provided.
• All aluminum extrusion and aluminum bronze castings - cannot rust.

MOUNTING

The standard bar mounts on the left as you enter the basket from the ladder. If this kind of mounting will interfere with a control panel in the basket, an aerial bar that mounts on the opposite side is available. The Aerial ar comes with a 6 or 10 inch stainless steel loop welded to an unpadded ManSaver. Additional Info

Price:	$385.76

Aerial Bar option:
aerial, 24", 6" loop, left hand aerial, 24", 6" loop, right hand aerial, 26", 6" loop, left hand aerial, 26", 6" loop, right hand aerial, 24", 10" loop, left hand aerial, 24", 10" loop, right hand aerial, 26", 10" loop, left hand aerial, 26", 10" loop, right hand  
Cover color:
Yellow Grey Red Custom  

Quantity:

MANSAVER Safety Bars and Gates for Toll Plazas MSA600

The FRC ManSaver Bar has been used in the fire and emergency service industry for years to help safeguard personnel during operations. This spring loaded safety bar is now available as a Safety Gate to help safeguard toll plaza personnel.

The SAFETY GATE and STANCHION for TOLL PLAZAS helps safeguard personnel from inadvertently entering active traffic lanes.

Toll plaza staff safety is a critical issue. Established safety rules and procedures are in place to ensure the safety of employees. The Safety Gate is currently in use at toll plazas as an integral part of a complete safety program.

Average vehicle operating speeds through toll plazas are on the rise due to the increase of dedicated Electronic Toll Collection (ETC) lanes. Toll collectors, lane walkers, maintenance workers, and vendors servicing equipment who must cross toll collection lanes need safety measures in place to protect them. The Safety Gate is an innovative safety device which will help minimize pedestrian vulnerability to vehicle strikes.

A latched gate or chain can act as a physical barrier at pedestrian access points to traffic lanes, but these safety devices require user action to reset them and can easily be left open negating any benefit they might provide. The Safety Gate is spring loaded so that it always returns to a horizontal closed position. There is no user action required.

The Safety Gate and Stanchion is designed to help safeguard toll plaza personnel in areas where crosswalks and traffic lanes intersect.

FEATURES

• Simple spring loaded design that requires no relatching or rehooking by the user.
• Visible bright yellow or red cover and reflective tape.
• Durable weather proof vinyl cover and stainless steel internal components.
• Rust Proof assemblies made of aluminum extrusion and aluminum bronze castings.
• Maintenance Free and easy to install.

CURRENT INSTALLATIONS

Florida Turnpike
(FDOT-Turnpike District)
Pennsylvania Turnpike
(Pennsylvania Turnpike Commission)
Delaware Memorial Bridge
(Delaware River and Bay Authority)
Massachusetts Port Authority
Miami Dade Expressway
New York State Bridge Authority Additional Info

Price:	$312.86

Toll Plaza Gate options:
Toll Plaza, 24", no pin, yellow Toll Plaza, 26", no pin, yellow Toll Plaza, 28", no pin, yellow Toll Plaza, 30", no pin, yellow Toll Plaza, 32", no pin, yellow Toll Plaza, 34", no pin, yellow Toll Plaza, 36", no pin, yellow stanchion, Toll Plaza, 41"  
Toll Plaza, welded base option:
NO Toll Plaza, welded base Yes Toll Plaza, welded base  

Quantity:

MANSAVER - Replacement Covers MSA105-***

Replacement padding and cover for all Mansaver bars. When measuring, measure the entire length of the mansaver bar. If the bar is 22" you will need an 18 " replacement cover. If you order an 18" Cover you will get a 14" long cover.

Padding is closed cell polyurethane foam.

Covering is 13 oz. rip stop vinyl, secured to the bar with an epoxy that contains epoxy resins and amine hardners. Additional Info

Price:	$59.74

ManSaver Bar length:
14" length, yellow vinyl cover A14 16" length, yellow vinyl cover A16 18" length, yellow vinyl cover A18 20" length, yellow vinyl cover A20 22" length, yellow vinyl cover A22 24" length, yellow vinyl cover A24 26" length, yellow vinyl cover A26 28" length, yellow vinyl cover A28 30" length, yellow vinyl cover A30 32" length, yellow vinyl cover A32 34" length, yellow vinyl cover A34  
Cover color:
Yellow Grey Red Custom  

Quantity:

Interior Intercom, 2-station ICA100-A00

Interior intercom systems for ambulances and rescue vehicles.

 Intercom, 2-station, 8W, surf-A, surf-R, plastic case Additional Info

Price:	$348.71

Quantity:

ACT Intercom System 2 station HF or PTT ICA900

The ICA100 Interior Intercom
is ideal for use inside ambulances and rescue vehicles.

The FRC ICA100 Intercom is designed to meet the demanding needs of ambulances and rescue personnel for a two way vehicle communication system.

Basic System

The basic two-way intercom system includes a master station with volume and Push-To-Talk (PTT) controls and a remote station that provides hands-free operation. The remote station is always in transmit mode unless interrupted by a transmission from the master station.

SYSTEM OPTIONS

Remote Station with PTT Button
This option is for installations where a remote station with hands free operation is not required. The PTT button must be pressed for the remote station to transmit. Additional Info

Price:	$1,382.54

ACT Intercom System:
2 station HF or PTT 2 station, PTT/PTT, 2 speakers 3 station, PTT/PTT/HF, 3 speakers 3 station, PTT/PTT/PTT, 3 speakers  

Quantity:

Exterior Intercom System ICA200

Apparatus intercom systems that meet the demands of rescue and fire service personnel for two or three-way communication.Cantact TSS for different options and mounting requirments. Additional Info

Price:	$734.27

Exterior Intercon Option:
2 Station Surf / Flush mount -A20 3 Station Surf / Flush mount  

Quantity: